{"title":"AUTOMOTIVE","description":null,"products":[{"product_id":"t56-magnum-swap-kit-for-the-1990-nissan-300zx","title":"T56 magnum XL Swap kit for the 1990+  Nissan 300zx","description":"\u003cp\u003eCustom machined bellhousing with t56 adapter plate\u003c\/p\u003e\n\u003cp\u003ecrossmember\u003c\/p\u003e\n\u003cp\u003epilot bushing\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":32072729985099,"sku":"","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20201111_214947.jpg?v=1613009041"},{"product_id":"350z-forward-facing-intake-manifold-kit-base-kit","title":"350z Forward Facing Intake Manifold Kit","description":"\u003cp\u003eAdapter kit to run a holley high-ram style upper lid.  \u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eadapter kit\u003c\/li\u003e\n\u003cli\u003ehardware\u003c\/li\u003e\n\u003cli\u003eo-ring\u003c\/li\u003e\n\u003cli\u003ejumper harness for LS style drive by wire throttle body\u003c\/li\u003e\n\u003cli\u003eCarbon fiber upper plenum with black, red, or silver anodized throttle flange \u003c\/li\u003e\n\u003cli\u003eBlack anodized comes standard for lower adapter parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParts needed to finish installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLS style throttle body GM part # 12605109  or 87mm version GM part # 2173156. \u003c\/li\u003e\n\u003cli\u003eIntake filter and tube and maf flange, endless combinations I will leave up to you, oem MAF with tight 4\"to 3\" 90° silicone adapter is the easiest way.  Larger custom 3.5\" cold air intake recommended. \u003c\/li\u003e\n\u003cli\u003eUPREV(or similar) tune for throttle codes\u003c\/li\u003e\n\u003cli\u003eBrake booster hose will need extending to the 3\/8\" nipple provided \u003c\/li\u003e\n\u003cli\u003eThis manifold will not fit under the stock hood.  A hole can be cut or an aftermarket hood that provides more clearance can be used. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Dyno graph shown is 100% stock including oem catalytic converters 2004 350z VQ35DE .  Only mod being the high ram kit using stock maf housing and some uprev tuning. \u003c\/p\u003e\n\u003cp\u003eVideo https:\/\/youtu.be\/uh4S7Lehy4c\u003c\/p\u003e\n\u003cp\u003e*Lead time on product is 20 days.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePatent pending*\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Black","offer_id":32149548433483,"sku":"","price":1990.0,"currency_code":"USD","in_stock":true},{"title":"No upper plenum","offer_id":39791380430923,"sku":"","price":899.0,"currency_code":"USD","in_stock":true},{"title":"Adapter cable only","offer_id":39812207247435,"sku":"","price":185.0,"currency_code":"USD","in_stock":true},{"title":"Add cast holley upper plenum","offer_id":39843346153547,"sku":"","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/IMG_20191210_134257_413.jpg?v=1587011707"},{"product_id":"t56-magnum-xl-upgrade-kit-from-gen-1-magnums","title":"T56 magnum XL upgrade kit ( for gen 1 magnum kits)","description":"\u003cp\u003eIf you purcahsed a gen 1 T56 magnum adapter kit and want to switch to the XL these are the parts you will need\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":32935289749579,"sku":"","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20201101_102228_734387de-2a7b-49bd-afbd-52534317ef1d.jpg?v=1604553121"},{"product_id":"300zx-holley-hiram-base-kit-tall-version","title":"300zx holley hiram base kit ( tall version)","description":"\u003cp\u003eThis budget minded kit is for those who want to run a single plenum without having to spend alot or modify alot. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBolt on with minor modifications.  Works best with aftermarket sidefeed rails but will work with stock side feed fuel rails ( minor bending of feed and return lines required)\u003c\/p\u003e\n\u003cp\u003eKit includes adapter kit with throttle bracket, hardware and o-ring to run a holley upper intake manifold on a vg30de\/tt.  1990-1996\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou will need holley 300-245\u003c\/p\u003e\n\u003cp\u003eAny LS throttlebody\u003c\/p\u003e\n\u003cp\u003eThe LS TPS will work with oem nissan ecu. Extend the oem tps wiring to the LS tps.   Almost all LS throttlebodies have IAC mounted right on the throttle body. Custom ecu programing or a block off required. \u003c\/p\u003e\n\u003cp\u003eIntake valve cover humps will need to be removed and re-welded flat or purchase our billet intake covers.  JDM vg30det and vg20de valve covers will work also\u003c\/p\u003e\n\u003cp\u003eCold air intake fabrication on NA cars\u003c\/p\u003e\n\u003cp\u003eTT cars will reqiure our custom coupler sold seperatley (turbo pants twin 2.5\" to single 4\")  and some fab work to work with stock intercooler piping\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDoes not clear factory hood\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"No plenum","offer_id":33052510355531,"sku":"","price":899.0,"currency_code":"USD","in_stock":true},{"title":"Yes, add carbon upper plenum","offer_id":33052507471947,"sku":"","price":1798.0,"currency_code":"USD","in_stock":true},{"title":"Add holley cast upper plenum","offer_id":39759790407755,"sku":"","price":1275.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20201105_003638.jpg?v=1604560404"},{"product_id":"vg30-billet-valve-cover-set","title":"300zx Billet valve cover set","description":"\u003cp\u003eUses oem intake valve cover gasket\u003c\/p\u003e\n\u003cp\u003eExhaust covers use high temp oring cord for no more RTV mess\u003c\/p\u003e\n\u003cp\u003eBaffled to keep oil sling out of catch cans\u003c\/p\u003e\n\u003cp\u003eComes with oil fill plug baffles orings and hardware\u003c\/p\u003e\n\u003cp\u003e Replacement oring part number #96505k22\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":32935314587723,"sku":"","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/received_858054371625050.jpg?v=1604556048"},{"product_id":"vg30-under-the-plenum-top-feed-fuel-rail-kit","title":"300zx under the plenum top feed fuel rail kit. LIMITED RUN!","description":"\u003cp\u003eWE STOCK INJECTOR DYNAMICS, DISCOUNTED FUEL RAILS WHEN BUNDLED WITH INJECTOR ORDERS. \u003c\/p\u003e\n\u003cp\u003eLimited run due to other suppliers failing to fulfill orders, allow 3 weeks for delivery after we receive your core \u003c\/p\u003e\n\u003cp\u003eTop feed fuel rail kit for under the oem plenum and highram kits.  Kit requires you send us your lower to be machined to accept our fuel rail setup.      \u003c\/p\u003e\n\u003cp\u003e10y\/48p late style( 93+ Na and 94+ TT)\u003c\/p\u003e\n\u003cp\u003e30p\/40p early style ( 90-93 TT 90-92 NA)\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003eYour lower core must be in CLEAN, near spotless condition to go in our CNC machine, cleaning fee of $100 will be applied to any dirty cores not ready to be machined. \u003c\/p\u003e\n\u003cp\u003eYour EGR mounting boss will be removed to mount in our fixture.  \u003c\/p\u003e\n\u003cp\u003eNo oem fuel temp sender mounting boss. \u003c\/p\u003e\n\u003cp\u003e Minor clearancing of upper plenum needed to clear front passenger side rail( shown in photo) . Works with bosch 34mm long injectors. We personally use injector dynamics 1700x. Part# \u003cspan\u003e1700.34.14.14.6\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe recommend 1300x and 1050x as well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAny 14mm ID injector will work if you remove the extender caps in the case you already have top feeds for a 300zx or any other 14mm top feed\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Kit includes machined lower plenum with our custom bosses, Fuel rails and mounting hardware\u003c\/p\u003e\n\u003cp\u003e6an orb fittings and fuel hose not included\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*disclaimer: by purchasing this product you waive merlin machining of all liability. poor installs and faulty parts can cause dangerous fuel leaks*\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Already received core from you","offer_id":32935335460939,"sku":"","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Already recieved core and add IDX1050","offer_id":39701914976331,"sku":"","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Already recieved core and add IDX1300","offer_id":41956448305227,"sku":null,"price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Already received core and add IDX1750","offer_id":41956448337995,"sku":null,"price":2379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20201122_151720.jpg?v=1606417370"},{"product_id":"ultimate-hiram-kit","title":"300zx Ultimate hiram kit.","description":"\u003cp\u003eIdeal port and runner design for mid to upper RPM flow characterstic in NA and boosted applications\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eParts needed: holley# 300-245 or select the carbon upper ( or purchase our new sheet metal low ram on the site)\u003c\/p\u003e\n\u003cp\u003eRequires our top feed kit and valve covers\u003c\/p\u003e\n\u003cp\u003eHeater core hoses must be reworked\u003c\/p\u003e\n\u003cp\u003eTiming covers and backing plates need to be trimmed or removed\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDoes not clear factory hood\u003c\/span\u003e\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"No upper plenum","offer_id":32935334215755,"sku":"","price":899.0,"currency_code":"USD","in_stock":false},{"title":"Carbon upper plenum","offer_id":32935330381899,"sku":"","price":1980.0,"currency_code":"USD","in_stock":true},{"title":"Add cast holley upper","offer_id":39843330752587,"sku":"","price":1175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20200920_151135.jpg?v=1604557150"},{"product_id":"1990-300zx-t56-magnum-xl-full-swap","title":"1990+ 300zx T56 magnum XL full swap","description":"\u003cp\u003eEvery nut and bolt and part included to 100% swap in a T56 magnum into a z32 2+0 \u003c\/p\u003e\n\u003cp\u003e Message us for twin disc upgrades\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRPM shown in pics of 6th gear and 80mph for both NA and TT rear ends\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFreight included in the 48 cont usa\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eContact us for full installation quotes\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"No standard steel is fine","offer_id":39308486082635,"sku":"","price":8199.0,"currency_code":"USD","in_stock":true},{"title":"Yes, add upgraded billet driveshaft","offer_id":39308486115403,"sku":"","price":8399.0,"currency_code":"USD","in_stock":true},{"title":"Steel driveshaft dont include clutch","offer_id":40027844214859,"sku":"","price":7600.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum driveshaft dont include clutch","offer_id":40027844247627,"sku":"","price":7725.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20201111_214947_63d02b7b-4db1-4a48-9896-8f270266fbbb.jpg?v=1613009013"},{"product_id":"merlin-machining-t-shirts","title":"Merlin Machining t-shirts","description":"\u003cp\u003eAthletic fit \u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Large","offer_id":39292261466187,"sku":"","price":29.0,"currency_code":"USD","in_stock":false},{"title":"XL","offer_id":39292261498955,"sku":"","price":29.0,"currency_code":"USD","in_stock":false},{"title":"XXL","offer_id":39596369641547,"sku":"","price":29.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/MM_2.jpg?v=1637613267"},{"product_id":"basic-billet-water-outlet-kit","title":"billet water outlet kit V2","description":"\u003cp\u003e Billet waterpipe setup for 300zx vg30de vg30dett.  Tuck your waterlines for a clean look. \u003c\/p\u003e\n\u003cp\u003eDitch the clutter of the ugly bulky oem waterpipes. Egr delete required \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eKit includes\u003c\/p\u003e\n\u003cp\u003eQty2 6061 clear anodized o-ringed water outlets\u003c\/p\u003e\n\u003cp\u003eQty2 orings\u003c\/p\u003e\n\u003cp\u003eQty2 Low profile silicone water hoses\u003c\/p\u003e\n\u003cp\u003eQty4 worm gear clamps for leak free seal\u003c\/p\u003e\n\u003cp\u003eQty4 SS hardware\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSelect 6an option for build you own waterline setup with included parts shown in first photo.   Parts included are. If you want to source your own the parts are 1\/8\"npt male 90 to 6an female,6an tee, 6an tee with 1\/8\"npt male.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"No, i will source my own parts","offer_id":39399808598091,"sku":"","price":185.0,"currency_code":"USD","in_stock":true},{"title":"Yes, add 6AN outlets","offer_id":39399805648971,"sku":"","price":225.0,"currency_code":"USD","in_stock":true},{"title":"I want the NA kit","offer_id":39642216300619,"sku":"","price":185.0,"currency_code":"USD","in_stock":true},{"title":"Replacement heater hoses only","offer_id":40047941746763,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20210612_130030.jpg?v=1623521040"},{"product_id":"75mm-throttle-adapter","title":"75mm throttle adapter","description":"\u003cp\u003eUse this to adapt LS pattern to 75mm DBW throttle bodies for use with our 350z\/g35 Vq35DE intake manifold kit\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":39395626614859,"sku":"","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20210608_174950.jpg?v=1623269800"},{"product_id":"oem-billet-valve-cover-set","title":"OEM billet valve cover set","description":"\u003cp\u003eUses oem intake valve cover gasket\u003c\/p\u003e\n\u003cp\u003eExhaust covers use high temp oring cord for no more RTV mess\u003c\/p\u003e\n\u003cp\u003eBaffled to keep oil sling out of catch cans\u003c\/p\u003e\n\u003cp\u003eComes with oil fill plug, baffles, orings, and hardware\u003c\/p\u003e\n\u003cp\u003e*Minor clearancing may be required on oem plenums*\u003c\/p\u003e\n\u003cp\u003e Replacement oring part number #96505k22\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":39431096500299,"sku":"","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20210701_114816.jpg?v=1625975463"},{"product_id":"merlin-machining-twin-intake-manifold-full-kit","title":"SOLD OUT Merlin Machining Twin Intake Manifold kit FINAL PRE ORDER","description":"\u003cp data-mce-fragment=\"1\"\u003eFINAL PRE ORDER, allow 6-8 weeks for delivery.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003enewly designed twin intake manifold with integrated velocity stacks.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with DRIVE BY WIRE or DRIVE BY CABLE! (see notes at bottom of page)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e The oem intake manifold leaves alot to be desired in alot of areas, its ugly, its extremely heavy, very bulky, design based on low rpm torque and packaging requirements than all out power and looks.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-works with Merlin Machining under plenum fuel rails, polar engineering fuel rails, and all side feed injector configurations (oem, 300degree, etc)  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-works with OEM ECU* (see notes)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e -clears oem hood and timing covers \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-oem coils need to be shortened or use an aftermarket setup such as R8, LS, R35,etc\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e -must use our billet valve cover set or modify your own intake covers to work.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- 3 1\/8\" NPT ports on each bank and 1 3\/8\" brake booster fitting \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ekit includes\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- intake manifold\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- mounting hardware\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e -12AN balance tube \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e -65mm Throttle bodies, uses q45 or oem TPS\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e -dual throttle cable kit with mounts\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-select DBW option if you plan on running Drive by wire instead of oem style drive by cable. ( No throttlebody included)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNOTES:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eif using DBW any generic bosch throttlebody with proper bolt pattern will work, alot of manufacturers use the 65mmx 65mm bolt pattern such as the ford part # DS7Z-9E926-D or the OEM nissan hitachi R35 GTR throttle bodies. LOJ also sells the needed DBW pedal adapter required or Polar engineering*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDual throttle cable kit is cut to length by customer, email us if you need help*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003elower intake manifold gasket port matching HIGHLY recommened for maximum performance*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e manual cars with OEM ecu can be used but the power and ground pins on the TPS need to be switched, very easy to do, depin the oem harness or tps and swap locations between the red wire with the black wire. automatic transmissions can not do this mod\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eintake manifold most likely will need to be removed to change spark plugs*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eif using Drive by cable, setup the airflows as balanced as possible at idle, set your throttle body with the TPS on it to be the master. the master cable needs to be adjusted to move slightly before the slave throttle or you will have idle rpm changes when pressing the throttle pedal but NO change in Throttle postion sensor and can result in poor low rpm performance. *   \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eno idle air control provisions provided, we just set throtttle stops to desired idle. any kind of aftermarket controller could be added to the 12AN balance tube or modified oem setup, we will leave this up to the consumer, a solution may be added later if enough demand for one arises.*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003einstallation of this kit assumes all deletes have already been completed, more deleting relocating of wiring and hoses or other modifications may be required. *\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eany generic silicone 90 degree reducer adapter (2.75\" down to 2.5\") can be used to adapt to 2.5\" intercooler charge piping.*\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"black \/ drive by cable and include parts required \/ no i will source or modify my own valve covers","offer_id":39665854414923,"sku":"","price":2241.0,"currency_code":"USD","in_stock":false},{"title":"black \/ drive by cable and include parts required \/ add billet valve covers","offer_id":39665853595723,"sku":"","price":3551.0,"currency_code":"USD","in_stock":false},{"title":"black \/ Drive by wire \/ no i will source or modify my own valve covers","offer_id":39889322278987,"sku":"","price":1742.0,"currency_code":"USD","in_stock":false},{"title":"black \/ Drive by wire \/ add billet valve covers","offer_id":39889322311755,"sku":"","price":2950.0,"currency_code":"USD","in_stock":false},{"title":"Polished \/ drive by cable and include parts required \/ no i will source or modify my own valve covers","offer_id":39889322344523,"sku":"","price":2241.0,"currency_code":"USD","in_stock":false},{"title":"Polished \/ drive by cable and include parts required \/ add billet valve covers","offer_id":39889322377291,"sku":"","price":3551.0,"currency_code":"USD","in_stock":false},{"title":"Polished \/ Drive by wire \/ no i will source or modify my own valve covers","offer_id":39889322410059,"sku":"","price":1742.0,"currency_code":"USD","in_stock":false},{"title":"Polished \/ Drive by wire \/ add billet valve covers","offer_id":39889322442827,"sku":"","price":2950.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20211218_102051.jpg?v=1643956681"},{"product_id":"300zx-shift-knob","title":"300zx shift knob","description":"\u003cp\u003e6 speed t56 pattern or 5 speed oem pattern.   (Message about cd009 or others)\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"T56 6speed pattern","offer_id":39738063618123,"sku":"","price":150.0,"currency_code":"USD","in_stock":true},{"title":"OEM Nissan 5 speed pattern","offer_id":39738063650891,"sku":"","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20220208_114201.jpg?v=1650213190"},{"product_id":"vq-hr-adapter","title":"VQ HR adapter","description":"\u003cp\u003eHigh ram adapter.  Adapter and hardware only.\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Black","offer_id":40216999952459,"sku":"","price":1990.0,"currency_code":"USD","in_stock":true},{"title":"No, lower plenum only","offer_id":40217000902731,"sku":"","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/Screenshot_20220517-100237_Messenger.jpg?v=1652797536"},{"product_id":"300zx-electric-power-steering-column","title":"300ZX Electric power steering column","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/span\u003e:  OFFROAD USE ONLY, by purchasing this product you understand the oem safety feature of the oem collapsible column has been REMOVED and will no longer collapse in case of accident and merlin machining is not responsible for any use of this product. \u003c\/p\u003e\n\u003cp\u003eOem hybrid EPS column.  Oem column Core required, do not purchase unless i already have your core in hand. \u003c\/p\u003e\n\u003cp\u003eI only recommend the EPS swap to those who need the space and cannot run any version of hydraulic steering.  The EPS is a bit odd at first, sensitivity does not increase or decrease with speed like oem, it also self centers poorly after corners.  The oem system is designed very well and most importantly the column will collapse in an accident that pushes the column into the cabin and will spare your face and ribcage from impalement.  With all that being said the EPS does make my personal z seem like a much newer car.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eAC lower ducting needs cutting to be reinstalled. Does not affect function of A\/C.\u003c\/p\u003e\n\u003cp\u003eMinor dash harness relocation and tab bending on upper firewall may be required depending on year model.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRecommend a TT rack with a fully depowered rack and welded input spline.   \u003c\/p\u003e\n\u003cp\u003eA guide to 300zx rack depower can be found here. https:\/\/youtu.be\/AptSPk4ugc0\u003c\/p\u003e\n\u003cp\u003eI also welded my input shaft for no steering play. There are alot of miata how to guides online if you wish to do the same.\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":39767635132491,"sku":"","price":1400.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/IMG_20210809_110231_814.jpg?v=1653338457"},{"product_id":"300zx-dct-adapter-kit","title":"300ZX DCT ADAPTER KIT","description":"\u003cp\u003e  300zx DCT adapter kit \u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdapter plate to mount  BMW gs7d36sg (inline 6 only) Gearbox behind a vg30de(tt)  \u003c\/li\u003e\n\u003cli\u003eFlywheel with dampened hub\u003c\/li\u003e\n\u003cli\u003eTrans tunnel cover\/shifter mount \u003c\/li\u003e\n\u003cli\u003eCrossmember\u003c\/li\u003e\n\u003cli\u003eStarter\u003c\/li\u003e\n\u003cli\u003eStarter spacer bracket\u003c\/li\u003e\n\u003cli\u003eDriveshaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e300zx specific info: No tunnel modification required.  The oem side mounted starter is replaced with a plug and play rear facing compact starter.  Some light dct clearancing (shown in photos) is required.\u003c\/p\u003e\n\u003cp\u003eThe oem NA and TT oil filter trees cannot be used.  The BDE oil filter\/oil cooler relocation (or similar) is required.   The starter DOES clears the oem oil pan turbo drains(photo).  Aftermarket oil pans may not clear and have not been evaluated to work with this swap kit.\u003c\/p\u003e\n\u003cp\u003eThe DCT is extremely tight in the tunnel and some exhaust modifications may be required. \u003c\/p\u003e\n\u003cp\u003eNOTE: the dct oil pan sits very low in the car (photo) the pan sits 3\/4\" below the outer frame rails   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEverything else needed to complete the swap can be purchased from seems legit garage.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.seemslegitgarage.com\/copy-of-transmission-parts\u003c\/p\u003e\n\u003cp\u003eOur shop car build consisted of all seems legit garage parts, HTG GCU ( gearbox control unit)  the \"long ratio\" dct (2012-2018 F80 M3, 2013-2019 F82\/F83 M4, and the 2014-2019 F87 M2)  oem M2 shifter with a black forest industries shift knob, haltech elite 2500 ecu and canbus for a simple install.  2 canbus wires from haltech to HTG GCU and 2 canbus wires from our GCU to our oem bmw shifter.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease read all of the following links\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.seemslegitgarage.com\/post\/so-you-want-a-dct-chapter-1\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.seemslegitgarage.com\/post\/dct-bible-chapter-2-transmission-hardware\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.seemslegitgarage.com\/post\/dct-bible-chapter-3-control\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTLDR: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBUY bmw i6 long ratio DCT\u003c\/li\u003e\n\u003cli\u003eSend it to SLG for all wiring mods and adaptation\u003c\/li\u003e\n\u003cli\u003eBuy all required parts recommended by SLG\u003c\/li\u003e\n\u003cli\u003eInstall SLG modified dct with merlin machining adapter kit\u003c\/li\u003e\n\u003cli\u003eBuy haltech 2500 elite since HTG GCU  can-preset is already configured to read haltech canbus\u003c\/li\u003e\n\u003cli\u003eHave htg or SLG remote tune it\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":39852861653067,"sku":"","price":4490.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20220829_092402.jpg?v=1663038868"},{"product_id":"z31-300zx-high-ram-adapter","title":"Z31 300zx high ram adapter","description":"\u003cp\u003eHigh ram adapter with oring and hardware.  \u003c\/p\u003e\n\u003cp\u003e2x 1\/8\" npt ports for brake booster\/vacuum\/boost\u003c\/p\u003e\n\u003cp\u003eFlat black anodized\u003c\/p\u003e\n\u003cp\u003eDoes not clear oem distributor \u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Yes, add holey upper","offer_id":39925999829067,"sku":"","price":1174.0,"currency_code":"USD","in_stock":true},{"title":"No, just lower adapter","offer_id":39925999861835,"sku":"","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/received_1742878349208470.jpg?v=1671122241"},{"product_id":"full-dct-swap","title":"Full dct swap","description":"","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":39964784689227,"sku":"","price":8100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/products\/20220501_093453.jpg?v=1676741970"},{"product_id":"merlin-machining-polo","title":"Merlin Machining polo","description":"\u003cp\u003eWizard sleeve Dri-fit nike polo\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Medium","offer_id":40071545913419,"sku":"","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":40071545946187,"sku":"","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/files\/20230921-151405.jpg?v=1695344167"},{"product_id":"sheet-metal-low-ram-qty-5-intro-pricing","title":"Sheet metal low ram","description":"\u003cp\u003eYes it clears the hood with our ultimate lower!    MUH HOOD!  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFord throttle body pattern.  We use the RMR 90mm and ford tps. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHood bracing will need trimming to clear plenum.   Ecu coolant temp will need to be relocated. Timing covers and backing plates cannot be used also.  Allow 3-4 weeks for fabrication and delivery .  Upper lid only.  Requires our lower adapter sold seperately.  Does not clear oem clutch fan or radiator as well. \u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":40308412842059,"sku":"","price":965.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/files\/received-1055373189129068.jpg?v=1707239509"},{"product_id":"untitled-feb17_20-03","title":"Single turbo kit (Final run! )","description":"\u003cp\u003e(Allow 1 week for delivery)Bolt on single turbo kit.  Currently hot parts only (shown) and oil feed line (not shown, oil drain not included). turbo and wastegate not included. A 100% complete kit to be offered depending on demand.Clears oem powersteering pump (reservoir may need relocation)  clears merlin machining aftermarket A\/C kit (available, message us).  Y pipe included to adapt to most available aftermarket catbacks.  Fits NA or TT models and 2+2, Fits RHD also\u003c\/p\u003e\n\u003cp\u003e Video:  https:\/\/youtu.be\/rI9Z4WprF-Y?si=tV3GKoVUnUtJUmrX\u003c\/p\u003e\n\u003cp\u003eOther parts needed for a complete install:\u003c\/p\u003e\n\u003cp\u003e1. Turbo. We use and recommend the pulsar MIRRORED 6262g (g35-900) Dual vband 1.01ar turbine. With supporting mods this turbo should support easy 700whp. \u003c\/p\u003e\n\u003cp\u003e2.Wastegate. we recommend the tial mvr 44 for stable boost control and long term reliability. \u003c\/p\u003e\n\u003cp\u003e3. Intercooler + radiator combo.  2jz guys have had good luck with the CX racing vmount kit.  Or  The chasebays honda tuck radiator and any generic 3\" intercooler.   Intercooler piping is extremely short and simple and can be completed with any generic off the shelf coupler piping combo\u003c\/p\u003e\n\u003cp\u003e4.  Standard upgrades.  Injectors, clutch, standalone or eprom tune. Etc.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReturns are subject to 20% restocking fee and return shipping fees\u003c\/p\u003e","brand":"Merlin Machining","offers":[{"title":"Default Title","offer_id":40324914675787,"sku":"","price":2950.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/files\/IMG-20240106_220806_039.jpg?v=1708220616"},{"product_id":"the-dean","title":"THE DEAN","description":"\u003cp\u003eBillet Intake valve covers with baffles. 10an orb breather ports. 12an orb oil fill\u003c\/p\u003e\n\u003cp\u003eFlat lower plenum adapter, same that dean runs 7s with\u003c\/p\u003e\n\u003cp\u003eSheet metal plenum that clears oem hood\u003c\/p\u003e\n\u003cp\u003eHardware included. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNOTES:\u003c\/p\u003e\n\u003cp\u003eSheet metal plenum is ford pattern, You will need a RMR 90mm throttle body and wire in a ford tps\/ or other tps. \u003c\/p\u003e\n\u003cp\u003ePolar top feed kit or merlin machining top feed kit required.  \u003c\/p\u003e\n\u003cp\u003eBillet water outlet kit required or heater pipe modification to clear lower plenum adapter. \u003c\/p\u003e\n\u003cp\u003eTiming cover backing plates and upper covers need to be removed as well.\u003c\/p\u003e\n\u003cp\u003eA coolant temp sensor plug is included in the kit, you will need to relocate the temp sensor for the ecu. The dash sensor can be slightly bent to clear. \u003c\/p\u003e\n\u003cp\u003eContact for more info.  20% restocking fee on all order cancelations. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHood bracing will need trimming to clear plenum. Ecu coolant temp will need to be relocated. Timing covers and backing plates cannot be used also. Allow 3-4 weeks for fabrication and delivery . Upper lid only. Requires our lower adapter sold seperately. Does not clear oem clutch fan or radiator as well. \u003c\/p\u003e","brand":"Merlin Machining ","offers":[{"title":"The dean","offer_id":43035665137739,"sku":null,"price":2600.0,"currency_code":"USD","in_stock":true},{"title":"The dean plus lower highram adapter","offer_id":43035665596491,"sku":null,"price":2920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/files\/Screenshot-20250912_193940_Instagram.jpg?v=1757802859"},{"product_id":"ac-kit","title":"AC KIT","description":"\u003cp\u003eFull AC replacement. Tuck all your AC components out of the way of your Twin turbo piping and single turbo piping. Oem system is MASSIVE, obsolete, and weighs a ton. \u003c\/p\u003e\n\u003cp\u003eThis kit connects to your oem evaporator at the firewall and you will reuse your oem pressure switch on the provided new drier\u003c\/p\u003e\n\u003cp\u003eKit includes :\u003c\/p\u003e\n\u003cp\u003eAll new soft lines that can tuck in the passenger fender well( or route however you like)\u003c\/p\u003e\n\u003cp\u003eGM compressor \u003c\/p\u003e\n\u003cp\u003eAuto tensioner\u003c\/p\u003e\n\u003cp\u003eNew belt\u003c\/p\u003e\n\u003cp\u003eBillet aluminum block to bracket adapter\u003c\/p\u003e\n\u003cp\u003eCompressor bracket\u003c\/p\u003e\n\u003cp\u003eCompressor high and low side adapter fitting\u003c\/p\u003e\n\u003cp\u003eNew high efficiency condenser\u003c\/p\u003e\n\u003cp\u003eNew drier\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003eYou will need an AC shop to pull vaccum and charge system R134a. \u003c\/p\u003e\n\u003cp\u003eNo mounting brackets for condenser included, mounting is up to customer\u003c\/p\u003e\n\u003cp\u003eAllow 2 weeks fab time plus shipping.\u003c\/p\u003e\n\u003cp\u003eThis kit will work on NA and twinturbo cars but the oem condenser fan will probably need to be removed and mounting the condenser may require some custom brackets we dont provide. \u003c\/p\u003e\n\u003cp\u003e Oem ac compressor plug is NLA any generic single pin connector will work or just cut your old connector off and splice it in. Or just hardwire it in\u003c\/p\u003e\n\u003cp\u003eKit is designed as a tuck kit to route into passenger fender under the liner with battery tray removed or modified.  This is not required for the kit to work the lines are long enough to route for any build or configuration \u003c\/p\u003e","brand":"Merlin Machining ","offers":[{"title":"Bracket+compressor +adapter fitting only","offer_id":42170966933579,"sku":null,"price":950.0,"currency_code":"USD","in_stock":true},{"title":"Full kit","offer_id":42170971947083,"sku":null,"price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/files\/Screenshot-20250411_180201_Facebook.jpg?v=1771958819"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/4614\/6123\/collections\/IMG-20240106_220806_039.jpg?v=1789251413","url":"https:\/\/merlinmachining.com\/collections\/automotive.oembed","provider":"Merlin Machining ","version":"1.0","type":"link"}